The gel imaging analysis system is an imaging device that can conduct qualitative and auxiliary quantitative analysis of the collected images through corresponding analysis software. The gel imaging system can be used in routine bioengineering research such as molecular weight calculation, density scanning, density quantification and PCR quantification.

How to maintain the gel imaging analysis system:

1. The maintenance cycle of the gel imager is generally about two weeks. The instrument must be kept clean, and the outer surface must be clean. Open the instrument and software and observe whether the software data cables are in normal contact and whether the software operation functions are intact.

2. It is prohibited to reinstall the system, because after reinstallation, the instrument software needs to be reactivated before it can be used.

3. The correct closing method should be used to close the door of the camera obscura. Do not push hard to close the camera obscura door.

4. During daily use and maintenance, pay attention to keeping the UV light box and projection white light plate clean to avoid affecting the gel imaging effect of the gel imager.

5. During the operation of the gel imager, in addition to using the instrument correctly, please strictly abide by the laboratory regulations.

The gel imaging system is a gel analysis system that integrates observing, photographing and analyzing gels. It is a commonly used instrument in laboratories. This system allows both quantitative and qualitative analysis of gels.